Evabarrier 6.2mm Beer/Gas Hose
Hopback Homebrewing Supplies
Evabarrier 6.3 ID x 9.5mm OD (1/4" x 3/8") Beer Hose -
This 6mm size is a larger size normally either used for gas or long draw keg systems. Its not recommended for direct draw kegerators as it does not apply much flow resistance.
If you did use this beer line in your kegerator you will need about 6-8meters of beer line to get the adequate flow resistance and for this reason we would normally recommend the smaller 5mm or 4mm ID lines for Kegerator setups.
This type of line is quite commonly used with the icebank systems or temprite systems. It's a very common size for long draw keg systems where lower line resistance is desirable.
This new EVA Double walled tubing is made with an EVA outter wall and also an inner proprietary polymer barrier.
SOLD BY THE FOOT
Pressure Rating (with 1.5 safety factor)
30C - 1.4 MPa (200psi)
50C - 0.7 MPa (100psi)